How much play is acceptable in a wheel bearing?

Wheel bearing play - how much is too much? - Honda-TechIf the nut is loose you may (and probably will) feel play in the hub/bearing even if it is nearly new. It is critical to torque the nut at least to factory spec. Not enough 

Viewing a thread - Acceptable play in a roller wheel bearingAssuming you can still tighten the castle nut to get the bearings snug how much play can the rollers have within the outer cage? I don't want How much wheel bearing movement is ok? - Pelican PartsJun 19, 2016 — Hi, I have some play in my front wheels (top/bottom) After reading 100+ threads on After reading 100+ threads on front wheel bearing adjustment, I was wondering how much (axial)movement was acceptable 6 & 12 'O clock

play on front wheel bearing to much/what is acceptable?Jun 19, 2016 — Hi, I have some play in my front wheels (top/bottom) After reading 100+ threads on front wheel bearing adjustment, I was wondering how much 

• How Much "Slack" Is Ok in WheelSo recently on a trip out of town I had a front wheel bearing start How much "play" is normal/acceptable for front & rear wheel bearings?How much play is OK with front-wheel bearing in a hub? - QuoraMay 30, 2018 — If the bearings are part of a sealed assembly (called a “Hub Bearing”), there drive vehicles), a slight, barely perceptible amount of movement is acceptable

How much play shoudl there be in the front wheel bearingsJun 8, 2008 — Is this the acceptable method for testing wheel bearing play? If there should be no play, I will re-adjust the bearings as described. I used the Wheel Bearings 101 - Brake & Front EndOne way to check wheel-bearing play is to raise the wheels off the ground and rock the tires in and out while watching for any looseness. As a rule, there should be no play on most FWD cars, but up to . 010 inch of play in the front bearings may be acceptable on RWD cars and trucks with adjustable bearings

MOT Testers and wheel bearing play | Technical mattersNot many people seem to know that there should be a noticeable amount of play in a properly adjusted wheel hub as this allows for expansion of how much sideways "play" in front hub / bearing is OK? - BikeJun 8, 2011 — Should I try tightening it again until the play is gone, or is a little side to side play OK? I don't want to overtighten and damage the hub or bearings