NSK 23330CAME4C4U15-VS Bearing

d:80 mm; l2 max.:389 mm; h:295 mm; C1 max.:48 mm; G:M 80x4; Specific dynamic load factor K:100 N/mm²; Mass rod end:14.5 kg; l7 min.:98 mm; d2 max.:182 mm; Material constant KM:330;

B:65.484 mm; J min.:209.55 mm; H1:69.85 mm; Limiting speed:3800 r/min; S:0.794 mm; A:88.9 mm; L:266.7 mm; da:63.5 mm; Basic dynamic load rating C:193 kN; H2:41.275 mm;

rc max.:1 mm; Fatigue load limit Pu:132 kN; r5 min.:1 mm; b:16 mm; 2B:128 mm; Calculation factor e:0.35; Calculation factor Y1:1.9; D:190 mm; Calculation factor Y0:1.8; T:135 mm;

Da min.:115 mm; Calculation factor Y0:0.6; Basic dynamic load rating C:346 kN; T:54 mm; d:70 mm; C:42 mm; Da max.:139.5 mm; Limiting speed:4300 r/min; rb max.:2.5 mm; Fatigue load limit Pu:45 kN;

Grease Speed Rating n1:960 rpm; Oil Speed Rating n2:1200 rpm; d:300.000 mm; Basic Static Radial Load Rating Co:1700000 N; B:148.00 mm; Fillet Radius rb:1.50 mm; Fillet Radius ra:3.00 mm; D:460.0000 mm; Basic Dynamic Radial Load Rating C:832000 N;

R2:41.275 mm; Eye bolt:2 x 3/8-16 UNC; P60°:234 kN; P90°:140 kN; N1:28.575 mm; P180°:89 kN; Da:319.999 mm; Cap bolt:4 x 3/4-10 UNC; Pa:60.5 kN; End plug (suffix Y):EPR 19;

Sealed Speed Rating n3:15000 rpm; B:11.00 mm; Basic Static Radial Load Rating Co:3400 N; Oil Speed Rating n2:26000 rpm; Grease Speed Rating Open/Shielded n1:20000 rpm; Accessories:Without Accessories; Grease Speed Rating n1:20000 rpm; D:35.0000 mm; Oil Speed Rating Open/Shielded n2:26000 rpm; d:10.0

D:110.0000 mm; d:60.000 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:5000 rpm; Basic Dynamic Radial Load Rating C:70200 N; Sealed Speed Rating n3:3800 rpm; Basic Static Radial Load Rating Co:58500 N; Accessories:Shield & Seal; Grease Speed Rating n1:3800 rpm; B:36.50 mm;

Sealed Speed Rating n3:2800 rpm; Oil Speed Rating n2:3800 rpm; d:70.000 mm; B:63.50 mm; Basic Static Radial Load Rating Co:186000 N; Fillet Radius ra:2.00 mm; Accessories:No Shield, no Seal; Basic Dynamic Radial Load Rating C:172000 N; Grease Speed Rating n1:2800 rpm; D:150.0000 mm;

B4:28.575 mm; Hydraulic nut:HMVC 30E; G:159.614 mm; Lock washer:W 30; Mass adapter sleeve assembly:8.15 kg; d:150 mm; Sleeve:S 130x5.5/16; d3 max.:195.402 mm; Lock nut:AN 30; d1:134.938 mm;

Appropriate attachment bolt size G:0.5 in; Ca:37.008 mm; h:28.575 mm; Cap bolt, SAE grade:8; Mass pillow block:15.4 kg; Adapter sleeve assembly:SNW 15x2.1/2; J min.:219.075 mm; S:3.175 mm; N1:15.875 mm; ba:32.544 mm;

D2:66.85 mm; Calculation factor f:1.06; Db max.:70.8 mm; Calculation factor f2A:1; Calculation factor f1:0.99; Da max.:70.4 mm; B:16 mm; Basic dynamic load rating C:12.1 kN; d1:55.7 mm; Calculation factor f2B:1.03;

Basic Dynamic Radial Load Rating:4560 lbf; Basic Static Radial Load Rating Co:3440 lbf; Insert Bearing IB:Stainless Steel; Diameter D3:1.815 in; Dimension S:0.689 in; Outher Width C:0.7480 in; Inner Width B:1.688 in; Bore Diameter D:1 3/8 in; Outside Diameter D2:2.8346 in; Weight W:0.90 lb;

d1:40 mm; G:M 45x1.5; B1:39 mm; Mass adapter sleeve assembly:0.24 kg; B:13 mm; Lock nut:KMFE 9; d3:65 mm; d:45 mm;

Calculation factor kr:0.2; da max.:81 mm; D:125 mm; Limiting speed:6300 r/min; Reference speed:6000 r/min; da min.:79 mm; Basic static load rating C0:193 kN; ra max.:1.5 mm; Axial load factor Y:0.4; D1 ≈:108.2 mm;