TIMKEN 22315EMW33W800C4 Bearing

ra max.:6 mm; d2 ≈:917 mm; Basic static load rating C0:20000 kN; da max.:917 mm; B2:90 mm; D:1150 mm; Reference speed:260 r/min; Calculation factor Y2:5; b:22.3 mm; Ba min.:28 mm;

d:20 mm; Fatigue load limit Pu:0.212 kN; Limiting speed:26000 r/min; Mass bearing:0.067 kg; Da max.:38.8 mm; D1 ≈:34.8 mm; Calculation factor f0:13.8; B:12 mm; ra max.:0.3 mm; da min.:23.2 mm;

Da max.:65 mm; Limiting speed:13000 r/min; B:17 mm; d:35 mm; Mass bearing:0.26 kg; Basic dynamic load rating C:31.2 kN; ra max.:1 mm; d1 ≈:46.1 mm; Reference speed:20000 r/min; D:72 mm;

J1:31.8 mm; Hexagonal key size for grub screw N:3.969 mm; Bearing:YAR 207-104-2RF/VE49; s1:25.4 mm; End cover:ECL 207; T:47.1 mm; Recommended diameter for attachment bolts, inch G:0.5 in; L:95 mm; Limiting speed with shaft tolerance h6:3200 r/min; Recommended diameter for attachment bolts, mm G:12 m

Recommended tightening torque for self-locking shaft nut:300 N·m; Basic static load rating C0:37.5 kN; GS:M24x2; s:2.5 mm; Flange design:Flange with metric a; B1:60 mm; Recommended tightening torque for disc screws:100 N·m; B:106 mm; Sealing system:SKF Mudblock seal; Recommended tracto

A1:158.75 mm; Bearing:22232 CCK/W33; P150°:120 kN; Cap bolt, SAE grade:8; Mass pillow block:129 kg; Stabilizing ring:SR-32-0; H2:66.675 mm; P60°:345 kN; Da:289.999 mm; Initial grease fill:793.8 g;

Coefficient of friction µ max.:0.15; Tolerance housing:H7; h:96.5 mm; α:124 °; Mass bushing:2.3 kg; D:115 mm; Coefficient of friction µ min.:0.08; Tolerance shaft:e7; d:95 mm; B:80 mm;

Basic static load rating C0:7200 kN; r3,4 min.:5 mm; s max.:5 mm; da min.:416 mm; K:9 mm; Calculation factor kr:0.28; r1,2 min.:5 mm; Design variant/feature:NNU/CNW33; D1 ≈:539 mm; b:16.7 mm;

Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:51200 N; Grease Speed Rating n1:5000 rpm; Oil Speed Rating n2:6700 rpm; Basic Static Radial Load Rating Co:54000 N; d:45.000 mm; Accessories:One Seal & Snap-Ring; B:30.20 mm; D:85.0000 mm; Sealed Speed Rating n3:5000 rpm;

M:86.5 mm; f:10 mm; d1:108 mm; B:2.5 mm; d2:126 mm; d:90 mm; Mass lock washer:0.087 kg;

P60°:149 kN; J1:69.85 mm; da:96.838 mm; R1:67.866 mm; N1:22.225 mm; Stabilizing ring:2 x SR-1522; ba:42.069 mm; Appropriate attachment bolt size G:0.75 in; H2:50.8 mm; L:419.1 mm;

Mass bearing:1.47 kg; db min.:54.5 mm; Dimension series:525; C:26.988 mm; D:101.6 mm; Da min.:87 mm; r3,4 min.:3.3 mm; Cb min.:7.5 mm; a:21.627 mm; ra max.:3.5 mm;

B:20.5 mm; Mass inner ring:0.036 kg; F:28 mm; r, r1,2 min.:0.3 mm; d:22 mm;

N1:22.225 mm; A1:111.125 mm; da:71.438 mm; P180°:42.9 kN; RG:3/8 NPT; P150°:35.6 kN; Ca:69.799 mm; A2:171.45 mm; Da:180 mm; Initial grease fill:365.71 g;

s:29.766 mm; S:0.794 mm; J max.:161.925 mm; J min.:155.575 mm; Attachment bolt diameter G:12.7 mm; da:38.1 mm; H2:31.75 mm; Basic dynamic load rating C:96.5 kN; Limiting speed:6000 r/min; B:59.531 mm;